201911 · The oxidation film was prepared by anode oxidation method on ZL101 aluminium surface, its morphologies, compositions and phases were characterized with SEM (Scanning Electron Microscope), optical ...
Comparison Table of Cast Aluminum Alloy Grades - Iron
20201231 · Introducing a comparison table of cast aluminum alloy grades by Dandong Foundry in China. Cast aluminum alloy has very good liquidity and plasticity, and it can be used to produce the castings with complex shape. ... ZL101. AlSi7Mg (Fe) AЛ9. A03560. AC4C. G-AlSi7Mg. LM25. A-S7G. ZAlSi7MgA. ZL101A. AlSi7Mg.
2018101 · 1) ZL101 aluminum cast alloys. ZL101. >>. 2) ZL101 Al alloy. ZL101. 1. Evolution on morphology of primary phase in semi-solid ZL101 Al alloy during isothermal holding in the solid-liquid area is investigated and the effect of processing parameters on the morphology is discussed.
Investigation on corrosion mechanism of stirring paddles
202171 · In this study, ZL101 aluminum alloy was used as the melt material to be stirred, and A3 steel, heat-resistant stainless steel 1.4837, QT5310, HT300 were selected as the preparation materials of the stirring paddle, and the corrosion mechanism of stirring paddles of various materials in stirring ZL101 aluminum alloy melt were studied. ...
Effect of Process Parameters on the Microstructure of
ZL101 aluminum alloy semi-solid slurry is obtained with effect of chilling and stirring in serpentine channel. The microstructures of quenched slurry were prepared by serpentine channel and conventional casting, as shown in Fig. 3. The white phase is primary α-Al and the black matrix
The oxidation film was prepared by anode oxidation method on ZL101 aluminium surface, its morphologies, compositions and phases were characterized with SEM (Scanning Electron Microscope), optical profiler, EDS (Energy Disperse Spectroscopy), respectively, its friction coefficient and abrasion performance were analyzed by wear test, and its wear
Preparation of casting alloy ZL101 with coarse aluminum ...
200852 · grade aluminum alloy has not been reported. In this paper the study of making casting Al-Si alloy ZL101 with the coarse aluminum-silicon alloy is described. 2 Experimental 2.1 Composition and phases of coarse
Finding materials and property data at the click of a button By registering for the Total Materia FREE Trial it is possible to search and view the property data for over 450,000 alloys as well as find and compare equivalent materials from over 69 countries/standards in the unique, international Total Materia cross reference tables.
(PDF) Effect of Process Parameters on the Microstructure
201661 · Aluminum alloy is the important alloy which has been widely used. To reduce waste, it is necessary to thixoform these alloys in near net shape. Semi-solid slurry is the key in process. In this...
Study on diffusion welding SiCp/ZL101 with Cu interlayer
Through the vacuum diffusion welding SiCp/ZL101 aluminum with Cu interlayer,the effect of welding parame- ter and the thickness of Cu on the welded joint property was investigated,and the optimal welding parameters were put forward at the same time.The microstructure of joint was analyzed by means of optical-microscope,scanning electron
Study on non-interlayer liquid phase diffusion bonding for
2003121 · Abstract Through the vacuum diffusion bonding for SiCp/ZL101 aluminum matrix composite, the influence of bonding parameters on the joint properties was reported, with the aim to obtain optimal...